Highspeed hard drive & SSD duplicator/eraser. 3 target drives. Supports SAS & SATA drives.
High performance up to 18 GB *(Real performance depends on HDDâ€™s speed) transfer speed per minutes.
âŠ™ FAT16/32/64, NTFS, Linux(Ext2/Ext3/Ext4), Mac(HFS, HFS+, HFSX.) supports Systems & files copy.
âŠ™ Data Sanitization : Quick Erase, DoD erase, and Secure Erase.
âŠ™ Open-Platform design supports Multi-Interface HDD/SSD.
âŠ™ Real-Time PC Monitoring.
âŠ™ Log Report Management records all tasks details for better production management.
âŠ™ Cable â€“free connection for easier HDD insert & remove.
ITS series, a professional SAS/SATA Hard Disk Drive & Solid State Drive duplicator is especially designed for high-volume duplication runs. Equipped with ADR's unique multi-tasking controller technology, the ITS series SSD Duplicator can simultaneously copy 15 HDD/SSD targetswith high transfer speeds of up to 18 GB per minute based on real tests.
We guarantee highest productivity without speed degradation even when the number of targets increases. The ITS series SAS/SATA Hard Drive duplicator provides four copy modes:
quick smart copy, all partitions copy, percentage copy and whole HDD copy, can meet different duplication task requirements. The quick copy mode copies only the data portion of a drive and skips blank or unpartioned areas. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32, Mac (HFS, HFSX, HFS+) format are all supported with quick copy mode. It will highly increase the copy efficiency.
In addition, the ITS series SAS/SATA Hard Drive duplicator is equipped with different levels of Secure erase function, Quick Erase, Full Erase, DoD 5220 Erase government standards and last but not least is Secure Erase, each fulfilling different data wiping standards.
With up to 18 GB/m transferring bandwidth, the ITS series SSD duplicator is the best choice for professional HDD/PC/NB manufacturers. Each SAS/SATA interface is independent, no matter how many targets you would like to duplicate, the speed of the hard drive duplicator stays the same and doesnâ€™t decline. 18 GB per minute is far beyond any PC-based duplicators.
Whole HDD Copy
Whole HDD Copy supports all kinds of partition formats.
Systems & Data Copy
By System & Data copy mode, the Hard Drive duplicator can identify the HDD formats of FAT16/32/64, NTFS, Linux(ext2/ext3/ext4), Mac(HFS, HFS+, HFSX. It will only copy the data and system contained area, which enhances the copying efficiency very much.
4 Ways of Sanitization
The ITS series HDD duplicator offers 4 ways of erase.
1.Quick Erase: Takes few seconds to complete
2.Full Erase: Erase the complete HDD
3.DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
4.Secure erase: A National Institute of Standards and Technology 800-88 accept technique for properly purging hard drives. This method is supported by almost all modern SAS/SATA HDD.
â—Ž Support GPT, MBR table format
â—Ž Support Advanced format HDD, Up to 10TB above device
â—Ž Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
Open Platform Design
â—Ž Easier HDD Insertion & Removal
â—Ž Swappable HDD Port Module: easy for replacement and maintenance
â—Ž Cable-free connection on HDD: supports 1.8"/2.5"/3.5â€ť SAS/SATA HDD and SSD
â—Ž Via Adaptor: 2.5", 3.5â€ť IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR interfaces are compatible
Real-Time PC Monitoring
It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC.
1. Itâ€™s able to monitor duplication status from PC while duplicators are connected to it.
2. shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by. â€śEvent Logâ€ť
4. To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
Log Report Management
â—Ž Records operation time, each portâ€™s process details, including HDDâ€™s model, capacity, S/N, result (pass, fail).
â—Ž Real-Time recording and viewing Log Report via PC-Link
â—Ž Log report .txt file can be generated via USB port and saved to USB device
â—Ž It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)
Auto power control system
When the duplicator stop executing any function, the machine will automatically cut off the power of each port to protect the HDD from damage during removal from the duplicator. The power of each port will only be supplied when the operation is on.
There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different need. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. CD-writer.com Ltd makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. CD-writer.com Ltd or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if CD-writer.com Ltd has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification. Picture for illustration only!
Looking for wholesale, bulk or trade prices? Are you an Educational or Government customer? Get 30 days to pay!