This family of Addonics 1:1 HDD duplicator is an economical and simple to use one to one hard drive duplicator solutions. The basic model copies from any 3.5" SATA hard drive to another 3.5" SATA hard drive and the Deluxe model can copy from a 3.5" or 2.5" SATA hard drive to another 3.5" or 2.5" SATA hard drive. There is no computer needed or complex software to operate. Just open the doors on the two drive bays, load your master hard drive to the drive bay on top and another hard drive of capacity equal or larger than the master drive to the bottom drive bay, lock the drive door and push the start button to start the copying process.
Build from the following components :
- one Storage Tower III (model: ST3)
- one 1:1 HDD Duplicator Subsystem (model: HDUSAS)
- two Snap-In SATA Mobile Rack (model: AESNAPMRSA)
- two 2.5" - 3.5" drive adapters (model: AE25SN35SA)
- User guide
| Looking for wholesale, bulk or trade prices? Are you an Educational or Government customer? Get 30 days to pay! | |
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. CD-writer.com Ltd makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. CD-writer.com Ltd or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if CD-writer.com Ltd has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification. Picture for illustration only!
Model:
- HDD Duplicator Deluxe - Copy and 3.5" or 2.5" SATA hard drive to any 3.5"
or 2.5" SATA hard drive
Great for cloning another hard drive or for making a back up hard
drive.
OS independent
Copy up to 1.5Gbps depending on the performance of the hard drive
Supported maximum drive capacity - 2TB (new firmware for larger
capacity is expected to be available in 30 days)
Source and Destination drives are added or removed like tape
cartridges from each drive bay with no special tool required.
Completely standalone One to One hard drive duplicator with no
additional hardware or software required.
LCM control module provides a rich set of robust advanced
configuration options.
- Writing mode : Sector to Sector
- Support up to 1.5Gbps transferring rate (actual transfer rate depends on
the speed of the source and destination drive)
- Sturdy metal frame construction
- Snap-In Mobile Rack in two bottom drive bays
- LCD display with functional control panel
- Well ventilated for efficient air flow.
- Low noise high CFM ball bearing cooling fan
- Integrated 80W 110/240 auto-sense power supply
- Compact size (W x D x H): 7.48 x 10.63 x 6.5 inch (190 x 270 x
16.5 mm.)
- Weight: 8 lb. (3.63 Kg)
- Operating temperature and humidity: 0 - 60 degree C, 10% - 90%
RH
- Storage temperature and humidity: (- 20) - (65) degree C, 0% -
95% RH non-condensing
| Looking for wholesale, bulk or trade prices? Are you an Educational or Government customer? Get 30 days to pay! | |
*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. CD-writer.com Ltd makes no warranty expressed or implied with respect to accuracy of the information, including price, product editorials or product specifications. CD-writer.com Ltd or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if CD-writer.com Ltd has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification. Picture for illustration only!
|
Customers who bought this product also viewed the following products |
|
Or choose from these similar products | |
|
Use these tags to help find similar products |
HDD . Duplicator . Deluxe . 1:1 . Hard . Drive . Duplicators .
|